Bathroom Remodeling in Cumming, GA

A full primary bathroom remodel in Cumming runs $45,000 to $65,000+ in 2026 at the higher finish levels, with budget-tier primary remodels starting around $29,000. Hall and guest baths run $12,000–$45,000 depending on tier, and powder rooms $2,500–$18,000. These are the same North Atlanta ranges we publish in our full cost guide, and they assume complete scopes with permits — not fixture swaps.

The spread comes down to tile and waterproofing, vanity and countertop choices, and whether the layout changes — moving a drain or a wall is what pushes a project from the middle of a range to the top. In a county where the typical home is now worth about $619,000, a $50,000 primary bath sits comfortably inside the proportion most homeowners aim for. Sit down with the owner for a design consultation and get a realistic range for your bathroom before you commit to anything.

Almost always, yes — a bathroom remodel is plumbing and electrical work by definition. If your home sits in unincorporated Forsyth County, which covers most Cumming addresses, permits go through the county’s Building & Licensing department, which publishes a residential renovation permit packet for exactly this kind of project. Inside Cumming’s small city limits, the city issues separate plumbing, electrical, and mechanical permits instead.

Trade permits are inexpensive — county fees start around $37.50, and the first inspection visit is free — so permitting is never the expensive part of doing it right. What a permit actually buys you is a county inspector confirming the rough plumbing and electrical before the walls close: the two things you cannot check yourself once tile is up. Georgia law also requires a state residential contractor license for jobs over $2,500. If a bid is silent on permits, ask why before you sign anything.

For most owners of 1990s–2000s homes here, yes — it is the single most requested bathroom project in this housing stock. A prefabricated acrylic conversion runs about $1,500–$8,000, and a custom tiled walk-in shower with a bonded waterproofing membrane and frameless glass runs $5,000–$18,000 in the Atlanta market. Reusing the existing drain location keeps costs down; moving the drain or valve adds $500–$3,500, which is why that decision belongs in design, not demolition.

The logic is how you live: the corner garden tub that came standard in the primary suites of Windermere, Polo, and the Fieldstone neighborhoods typically hasn’t held water in years, while the small framed shower beside it gets used twice a day. Converting trades dead square footage for the fixture the household actually uses, and built over a proper membrane it will outlast the original builder shower. One caution — keep at least one tub in the house for resale.

Yes — we serve all of Cumming and Forsyth County, from the neighborhoods around downtown out to the lakeside streets off Buford Dam Road, including Habersham on Lanier, Lanier Country Club Estates, and the gated marina community of St Michael’s Bay. We are an Alpharetta company, about 20–30 minutes south on GA-400, and Cumming is one of the five cities we name in our service area.

Lakeside projects deserve a specific note: the communities near the water span a much wider range of construction eras than the county’s 2000s core — Habersham on Lanier alone was built out between 1972 and 2012 — so two bathrooms a street apart can need very different work, from a full gut of a 1970s hall bath to a finish-level update in a 2008 primary suite. That is exactly why the process starts with a design consultation at your house rather than a number over the phone.